TRANSFORMER HEALTH PRODUCTS®
Our Components Group in Dallas, Texas, manufactures a group of Transformer Health Products® designed to increase reliability and life of your transformer while lowering the cost of maintenance. Although branded together for the same end result, each of these components offers its own unique functionality.
2nd Generation Nitrogen Generator
SPX Transformer Solutions’ nitrogen generator66电玩城注册送60000金币 produces nitrogen from the air we breathe, providing a continuous, on-demand source of pure, dry nitrogen to protect and maintain the nitrogen blanket on sealed transformer tanks. Notable features include the following:
- Produces nitrogen at 120 psi instead of the traditional 3000 psi of a standard nitrogen cylinder; lower pressure means less system leaks
- Maintains transformer tank pressure between 0.2 and 5.5 psi to protect transformer oil from oxidation and moisture absorption
- Eliminates the need to transport and replace nitrogen bottles and the potential risk of maintenance personnel soft tissue injuries
Inert Air Systems
Using a standard nitrogen bottle, these positive pressure/regulated systems66电玩城注册送60000金币 protect transformer oil in the main tank from oxidation and moisture absorption by keeping tank pressure at proper preset levels.
2nd Generation LTC
Oil Filtration Systems
Designed to be installed on most LTC models to remove carbon and metallic particles produced during normal LTC operation, our 2nd generation oil filtration system helps keep oil in peak condition with minimal maintenance.
Dual Column Breather
The Dual Column Breather is the first breather that does not need to isolate itself from the transformer or LTC during its regeneration cycle. When one side needs to regenerate, the other side takes over, using a recharged column of silica to provide dry air to the transformer or LTC.
2nd Generation Positive
Temperature Coefficient (PTC) Heaters
Our Positive Temperature Coefficient (PTC) heater automatically maintains an enclosure temperature only slightly higher than the outside ambient temperature without using a thermostat or controls thereby protecting against heat damage and condensation.